Skip to main content

CARBOFIL NiMoCr

MIG/MAG solid wires range for high strength steels.

CARBOFIL NiMoCr is a copper coated GMn3Ni1CrMo/ER110S-G type solid MAG welding wire, depositing C-1.2Mn0.25Cr1.5Ni0.25Mo weld metal, used for the welding of high tensile strength steels and type Tl-HY100 steels. Suitable for use with Ar-CO2 mix shielding gases.
It meets the classifications:
        - EN ISO 16834-A: G 69 4 M21 Mn3Ni1CrMo
        - AWS A5.28: ER 110 S-G

OERLIKON expertise : CARBOFIL NiMoCr

CARBOFIL NiMoCr is used to weld <690 MPa yield strength steels with excellent mechanical properties and also for low temperature applications down to -40°C. CARBOFIL NiMoCr is available also in 300kg drum format. Low heat inputs are recommended to obtain optimum joint mechanical properties. Solid wire with excellent mechanical characteristics for use on high strength steels.

 

Available in B300, S300. Diameter from 0,8 to 1,2.

 

CARBOFIL NiMoCr - Chemical Analysis

    C Mn Si P S Cr Ni Mo
Wire   0,08 1,6 0,5 <0,015 <0,018 0,3 1,5 0,25
All Weld Metal (82% Ar + 18% CO2) 0,08 1,2 0,3 <0,015 <0,018 0,25 1,5 0,25

CARBOFIL NiMoCr - Mechanical Properties

Heat Treatment Yield Strength (MPa) Tensile Strength (MPa) Elongation A5 (%) Impact Energy ISO - V (J)
     

 

+20 °C -40 °C
As Welded ≥ 690 770-890 ≥ 17 ≥ 80 ≥ 47

Why choose us?

  • 01

    Expertise

    Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.

  • 02

    Customer focus

    Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.

  • 03

    International presence

    With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding ​products​. Oerlikon products can be found worldwide.

RELATED PRODUCTS