Skip to main content
citostep_mig_mag

CITOSTEP

Three-phase MIG/MAG step controlled power sources

Request for information
Should you require any assistance from Oerlikon or advice on our products or services, do not hesitate to contact us anytime.
CITOSTEP machines are intelligent MIG/MAG welding installations with voltage switching technology and numerical control of the parameters. Robust and reliable, they contain an innovative Easy Synergic Program (ESP) for an easy set-up of the equipments. Particularly suitable for shipyards, boiler factories, railway equipment and road transport sectors, these machines are able to weld low thickness metal sheets with reduced distortion and low emission of spatters. The reliability of this complete range make it one of the MIG references in today's market.

Link

Click here to see all references of this family of products.

Read more

Product Advantages

✔ Easy synergic program (ESP) for an easy set-up of the equipments
✔ Intelligent front panel with digital display
✔ Robust and reliable
✔ For separate range: digital display on the wire feeder
✔ Possibility to weld low thickness metal sheets with reduced distortion and low emission of spatters (EFQ process - intermittent mode)

10 good reasons to choose CITOSTEP for industrial installations:

  1. Robustness guaranteed by qualified crash test.
  2. ESP settings assistance to obtain the right welding parameters instantly.
  3. Quality of transformer and choke that guarantee exceptional welding of steel, stainless steel or aluminum.
  4. Control of choke for instant arc strike with minimal spatter.
  5. Duty cycle at 40 °C meeting industrial productivity requirements due to an optimized cooling.
  6. Complete welding cycle controlled by microprocessor card for high flexibility.
  7. Accurate and constant numerically controlled wire feed.
  8. Display of parameters (voltage, current, speed) essential for the conformity of operating modes.
  9. Enhanced reliability and life expectancy due to protection of switching equipment in a dust-proof compartment.
  10. Fully compliant, tested for EMC immunity and endurance to enable operations in harsh industrial environments.

Complet range with enclosed & external wire-feeder

  COMPACT RANGE   SEPARATE RANGE
  CITOSTEP 250C CITOSTEP 300C CITOSTEP 350C   CITOSTEP 350S CITOSTEP 450S CITOSTEP 450SW
Primary input

230 V / 400 V three phase ± 10% (50-60 Hz)

   230 V / 400 V three phase ± 10% (50-60 Hz)
Input (V) 230 400 230 400 230 400   230 400 230  400 230 400
Maximum consumption (A) 27 16 34 20 43 24   27 16 34 20 43 24
Load voltage (V) 42 14 47   47 54
Duty cycle at 40 °C at 60% (A) 170 230 270   370 345
Wire diameter 0,6 - 1,2 mm   0,6 - 1,2 mm 0,6 - 1,6 mm
Dimensions 870 x 550 x 890 mm 1 012 x 477 x 1 003 mm   1 012 x 477 x 1 003 mm
Weight 86 kg 113 kg 127 kg   122 kg 140 kg 158 kg
Standard EN 60974-1 / EN 60974-5 / EN 60674-10   EN 60974-1/ EN 60674-10

Why choose us?

  • 01

    Expertise

    Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.

  • 02

    Customer focus

    Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.

  • 03

    Global offer

    Oerlikon proposes global solutions from customer needs analysis to customised solutions for equipment, consumables, training and after-sales services.

RELATED PRODUCTS