Skip to main content

FLUXINOX 308L

MIG/MAG cored wires range for stainless and heat resistant steels.

FLUXINOX 308L is an alloyed rutile flux cored wire for the welding of unstabilised and stabilised corrosion resistant Cr Ni-steels.
It meets the classifications:
   EN ISO 17633-A: T 19 9 L R C 3   -    AWS A5.22: E308LT0-1
   EN ISO 17633-A: T 19 9 L R M 3   -    AWS A5.22: E308LT0-4
   EN ISO 17633-B: TS308L-FB0

Product Advantages

✔ Suitable for semi-automatic out-of-position welding.
✔ High deposition rates in the vertical-up position.
✔ Exceptionally smooth welding arc.
✔ Minimal spatter, even with CO2 shielding gas.

OERLIKON expertise : FLUXINOX 308L

Suitable for operating temperatures up to 350°C, non-scaling up to approximately 800°C. FLUXOFIL 308 L features outstanding, almost spatter-free, welding properties. Very easy slag removal from fillet welds. Flat and smooth weld beads without undercut.

Available in BS300, diameter from 1,0 to 1,6 mm.

 

FLUXINOX 308L Chemical Analysis

C Mn Si Cr Ni Ferrite
<0,04 1,7 0,6 20 10 6-10

FLUXINOX 308L Mechanical Properties

Heat Treatment Yield Strength (MPa) Tensile Strength (MPa) Elongation A5 (%) Impact Energy ISO - V (J)
        -20°C -196°C
As Welded ≥ 350 ≥ 520 ≥ 35 ≥ 40 ≥ 27

Why choose us?

  • 01

    Expertise

    Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.

  • 02

    Customer focus

    Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.

  • 03

    International presence

    With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding ​products​. Oerlikon products can be found worldwide.

RELATED PRODUCTS