✔ Suitable for semi-automatic out-of-position welding
✔ High deposition rates in the vertical-up position
✔ Low spatter loss
✔ Easy slag removal
PDF - 475.44 KB
Due to its easily controllable weld pool, the welding characteristics are outstanding. It can be welded in all positions with only one parameter setting (24 Volts, wire feed 9m/min, wire dia. 1,2 mm). The enhanced degree of filling results in increased current carrying capacity and deposition rate, thus increasing welding speed and leading to a saving of time and costs.
FLUXOFIL 14 HD is preferably used under mixed gas. The use of CO2 is possible.. Best choice for shipbuilding, structural steel, and general steel fabrication applications.
Available in B300, S200 and drum200kg.
Diameter from 1,2 to 1,6.
PDF - 593.19 KB
C | Mn | Si | P | S |
0,05 | 1,4 | 0,5 | <0,010 | <0,010 |
Heat Treatment | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A5 (%) | Impact Energy ISO - V (J) | |
-20°C | -30°C | ||||
As Welded | ≥ 460 | 550-650 | ≥ 24 | ≥ 80 | ≥ 50 |
Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.
Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.
With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding products. Oerlikon products can be found worldwide.