Skip to main content

FLUXOFIL M 42

MIG/MAG cored wires range for high-strength steels.

FLUXOFIL M42 is a seamless copper coated metal cored wire for welding of high strength steels with minimum yield strength of 690 MPa with outstanding welding characteristics in the short-arc and spray-arc ranges.
It meets the classifications:
    - EN ISO 18276-A: T 69 4 Mn2NiCrMo M M 1 H5
    - EN ISO 18276-B: T784T15-1MA-N4C1M2-UH5
    - AWS A5.28: E110C-GM H4
    - AWS A5.36: E110T15-M21A2-G-H4

Product Advantages

✔ Multi-pass welds without inter-run cleaning.
✔ Suitable also for positional welding.

OERLIKON expertise : FLUXOFIL M 42

FLUXOFIL M42 is a seamless copper coated metal cored wire for welding of high strength steels with minimum yield strength of 690 MPa with outstanding welding characteristics in the short-arc and spray-arc ranges. Almost spatter-free when welding in the spray-arc range. Good restriking, even with a cold wire tip, thus being suitable for robotic applications.

Available in B300 and drum 200kg. Diameter from 1,2 to 1,6.

 

FLUXOFIL M 42 Chemical Analysis

C Mn Si P S Cr Ni Mo
0,05 1,5 0,5 0,01 0,01 0,4 2 0,4

FLUXOFIL M 42 Mechanical Properties

Heat Treatment Yield Strength (MPa) Tensile Strength (MPa) Elongation A5 (%) Impact Energy ISO - V (J)
                       -40°C
As Welded 82% Ar+18% CO2 ≥ 690 770-896 ≥ 17   ≥ 80
580 °C x 2 h/f. M21 ≥ 690 770-896 ≥ 17   ≥ 80

Why choose us?

  • 01

    Expertise

    Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.

  • 02

    Customer focus

    Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.

  • 03

    International presence

    With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding ​products​. Oerlikon products can be found worldwide.

RELATED PRODUCTS