ALUFIL AlMg5 is used for the welding of Al-Mg alloys and Al-Mg-Zn alloys. The wire is also suitable for the welding of dissimilar aluminium alloy grades containing up to 5%Mg and components which are to be subsequently anodised. ALUFIL AlMg5 is the most popular Al welding wire, because of its high yield strength and high resistance to corrosion, including seawater. For special request ALUFIL AlMg5 is available with LRS (Lloyd's Register) approval.
Available in BS300, S200, S300.
Diameter from 0,8 to 1,6.
AL | SI | MN | MG | CR | TI | CU | FE |
Rem | 0,2 | 0,1 | 5 | 0,1 | 0,1 | 0,1 | 0,3 |
Heat Treatment | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A5 (%) |
As Welded | ≥ 110 | ≥ 240 | ≥ 17 |
Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.
Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.
With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding products. Oerlikon products can be found worldwide.