The flux is widely used for the welding of thick section components in the offshore, nuclear and pressure vessel industries. The flux exhibits low hydrogen content in the as manufactured condition and gives a high resistance to moisture pick up during exposure under workshop conditions. The flux promotes a very stable arc characteristic during use with excellent slag detachment. The weld is of a uniform even profile with regular fine ripple formation and smooth toe blending. OP 121TT W flux is suitable for use with DC+ or AC and is ideal for single wire, twin wire, tandem arc [DC+/AC] and other multi-arc systems using up to 1000A with single wire welding. Grain size according to EN-ISO 14174: 2-20.
Available in standard bags (PE) and DRYBAG 25 kg.
|Heat Treatment||Yield Strength (MPa)||Tensile Strength (MPa)||Elongation A5 (%)||Impact Energy ISO - V (J)|
|OE-S2||As Welded||≥ 360||450-550||≥ 28||≥ 160||≥ 100||≥ 50||-||-|
|OE-S2 Mo||As Welded||≥ 470||550-680||≥ 24||≥ 120||≥ 100||≥ 50||-||-|
|OE-SD3||As Welded||≥ 450||530-630||≥ 25||≥ 180||-||≥ 100||≥ 70||-|
|OE-SD3||600°Cx2h||≥ 400||490-590||≥ 27||≥ 200||-||≥ 120||≥ 90||-|
|OE-SD3 Mo||As Welded||≥ 550||610-670||≥ 29||-||-||≥ 110||≥ 80||-|
|OE-SD3 Mo||620°Cx1h||≥ 520||600-660||≥ 27||-||-||≥ 130||≥ 60||-|
Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.
Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.
With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding products. Oerlikon products can be found worldwide.