Skip to main content

ALUROD AlMg5

TIG Rods range for aluminum alloys.

ALUROD AlMg5 is a 5356 type aluminum solid TlG welding rod depositing Al-5Mg weld metal. Suitable for use with Ar, or Ar+He mixed shielding gases.
It meets the classifications:
   - EN ISO 18273: S Al 5356
   - AWS A5.10: ER 5356

OERLIKON expertise : ALUROD AlMg5

ALUROD AlMg5 is used for the welding of Al-Mg alloys and Al-Mg-Zn alloys. The rod is also suitable for the welding of dissimilar aluminium alloy grades containing up to 5%Mg and components which are subsequently to be anodised. ALUROD AlMg5 is the most widely used Al welding wire, because of the weld metals high yield strength and high resistance to corrosion, including seawater. TIG rod that deposits a 5% Magnesium aluminium alloy. Suitable for welding alloys like Peraluman and Anticorodal.

Available in TUB.
Diameter from 1,6 to 4,0.

 

ALUROD AlMg5 Chemical Analysis

AL SI MN MG CR TI CU FE
Rem 0,2 0,1 5 0,1 0,1 0,1 0,3

ALUROD AlMg5 Mechanical Properties

Heat Treatment Yield Strength (MPa) Tensile Strength (MPa) Elongation A5 (%)
As Welded ≥ 110 ≥ 240 ≥ 17

Why choose us?

  • 01

    Expertise

    Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.

  • 02

    Customer focus

    Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.

  • 03

    International presence

    With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding ​products​. Oerlikon products can be found worldwide.

RELATED PRODUCTS