CARBOROD Ni1 is used for welding of 1%Ni steels and fine grain steels, when the weld metal toughness properties down to –60°C are required in the as welded conditions. The weld metal contains less than 1%Ni conforming to NACE requirement. TIG rod for welding 1% Ni alloy and fine grain steels for low temperature applications.
Available in TUB. Diameter from 1,6 to 3,2
C | Mn | Si | P | S | Ni |
0,08 | 1,1 | 0,6 | <0,020 | <0,020 | 0,9 |
Heat Treatment | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A5 (%) | Impact Energy ISO - V (J) | ||
|
+20°C | -60°C | ||||
As Welded | ≥ 460 | 550-680 | ≥ 24 | ≥ 120 | ≥ 47 |
Our 4 research and development centers facilitate the rapid transfer and implementation of important products innovations through the whole Oerlikon network.
Oerlikon supplies customized solutions through performance and innovation, to meet stringent specifications and increasing demands for enhanced welding productivity.
With 12 productions units throughout Europe & China, Oerlikon is one of the largest supplier of welding products. Oerlikon products can be found worldwide.